HDVault 12 x 3.5" SATA / PATA / IDE Hard Drive Storage Case
Description
This custom foam DORO D1611-6 case fits twelve (12) standard 3.5" form factor bare PATA / IDE or SATA hard drives.
- MILITARY GRADE ANTI-STATIC FOAM - High quality MyCaseBuilder® closed-cell anti-static polyethylene foam protects against static electrical damage.
- LIGHT & STRONG - Heavy duty injection molded case is impact and crush resistant yet lightweight for easy transport. IP67 RATED - Waterproof, dustproof and airtight with pressure equalization valve.
- Lifetime Warranty
- IP67 Waterproof Rating
- Auto Pressure relief valve
- Easy to open double throw latches
- Load tested Soft Grip Handle
- Double Padlock Holes
- Full Length Hinges
- Stackable interlocking system
- Corrosion free Nylon Pins
Premium features at an Economy Price! Compare to Pelican, Storm, HPRC, SKB and Nanuk
UPC: 735424777046
Specifications
Inside Dimensions
Length:
16.75" (426mm)
Width:
11.3125" (287mm)
Base Depth:
4.4375" (113mm)
Lid Depth:
1.83" (46mm)
Total Depth:
6.26" (159mm)
Corner Radius:
.5 (13mm)
Outside Dimensions
Length (O.D.):
18.27" (464mm)
Width (O.D.):
14.41" (366mm)
Total Depth (O.D.):
6.93" (176mm)
Case Information
Case Type:
Injection Molded
Durability:
Heavy Duty
Empty Weight:
6.08 lbs (2.76 kg)
Handle:
Foldable
Latch Type:
Up and over pull down
Lockable:
Double Padlockable (Fits 0.313" Shackle)
Made in the U.S.A.:
No, Made in Italy
Pelican Equivalent:
Pelican 1500
Pressure Relief Valve:
Yes
TSA Approved
:
TSA requires the following:
- The firearm must be in a hard-sided container.
- The container must be locked. A locked container is defined as one that completely secures the firearm from being accessed. Locked cases that can be pulled open with little effort cannot be brought aboard the aircraft.
Please refer to the TSA website for more information:
TSA Transporting Firearms and Ammunition
Yes, Airline approved
Wall Construction:
Single Wall-Injection Molded
Waterproof
Waterproof: Yes - IP67 Rated 100% protected from dust and sand and can be submerged up to 3 feet of water for up to 30 minutes
Weather resistant - Can withstand spashes of water but cannot be submerged
:
Weather resistant - Can withstand spashes of water but cannot be submerged
Yes
Wheels:
No Wheels
Custom Foam Information
With MyCaseBuilder, you are designing full replacement foam for the base of your case.
When you receive your foam it will be the full height and slip right into the base of your case.
If you have a case already and only need replacement foam, you will have the choice to add lid foam during checkout.