Ethos Eyepieces Custom Case - HPRC 2400

Choose your Case Color
TCF-HP2400-11280
+

Description

Store your Ethos eyepieces properly in this precision-cut custom foam HPRC case. Click the CUSTOMIZE button to add or remove spaces for other shapes or accessories!

Case with foam as shown includes black TopGuard base and charcoal ester convoluted lid.


Includes Spaces for:

A - Tele Vue Visionary Ethos 6mm Eyepiece

B - Tele Vue Visionary Ethos 8mm Eyepiece

C - Tele Vue Visionary Ethos 10mm Eyepiece

D - Tele Vue Visionary Ethos 3.7mm Eyepiece

E - Tele Vue Visionary Ethos 13mm Eyepiece

F - Tele Vue Visionary Ethos 4.7mm Eyepiece

HPRC 2400
O.D. 15.94" x 12.99" x 6.69"
I.D. 14.87" x 10.37" x 5.93"

Features

Lightweight, waterproof, unbreakable case that can be used to carry every kind of equipment and accessories.

It is available with a cubed foam or with an interior soft deck, or can be purchased empty.

• ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics

• automatic valve which automatically adjusts the air pressure inside

• internal O-ring made of neoprene PA66 makes the suitcase is totally waterproof

• Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall

• reinforced corners that make it extremely shock-resistant

• Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of suitcases HPRC find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company.

• Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features.

• The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F).

All suitcases HPRC are watertight, resistant to dust, moisture, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR.

The entire production line of suitcases HPRC is ISO9001 confirming a particular attention and interest in maintaining a product at the highest level. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.

Choose from the following colors at checkout

 
HPRC Case Black
BLACK
 
HPRC Case Blue
BLUE
 
HPRC Case Red
RED

Specifications

Inside Dimensions

Length:
14.875" (378mm)
Width:
10.375" (263mm)
Base Depth:
4.1875" (107mm)
Lid Depth:
1.75" (44mm)
Total Depth:
5.9375" (151mm)
Corner Radius:
.5" (13mm)

Outside Dimensions

Length (O.D.):
15.94" (405mm)
Width (O.D.):
12.99" (330mm)
Total Depth (O.D.):
6.69" (170mm)

Case Information

Carry On :
Yes
Case Type:
Injection Molded
Durability:
Heavy Duty
Empty Weight:
4.52 lbs (2.05kg)
Handle:
Foldable
Latch Type:
Up and over pull down
Lockable:
Padlockable
Made in the U.S.A.:
No, Made in Italy
Pressure Relief Valve:
Yes
TSA Approved :
Yes, Airline approved
Wall Construction:
Single Wall-Injection Molded
Waterproof :
Yes
Wheels:
No Wheels

Custom Foam Information

With MyCaseBuilder, you are designing full replacement foam for the base of your case.

When you receive your foam it will be the full height and slip right into the base of your case.

If you have a case already and only need replacement foam, you will have the choice to add lid foam during checkout.