FLIR MR176 in a PZ4 Case
Description
This case and foam holds a FLIR MR176 and all its accessories.
- FLIR MR176
- BALL PROBE MOISTURE SENSOR (MR12)
- WALL CAVITY PROBE (MR06)
- HAMMER PROBE (MR07)
- EMPTY CAVITY FOR OTHER EQUIPMENT
Case with foam as shown includes black TopGuard base and charcoal ester convoluted lid.
Specifications
Inside Dimensions
Length:
24.5625" (624mm)
Width:
13.1875" (335mm)
Base Depth:
3.125" (79mm)
Lid Depth:
.625" (16mm)
Total Depth:
3.75" (95mm)
Corner Radius:
.25" (6mm)
Outside Dimensions
Length (O.D.):
26" (660mm)
Width (O.D.):
15.56" (395mm)
Total Depth (O.D.):
4.5" (114mm)
Case Information
Case Type:
Blow Molded
Durability:
Medium Duty
Empty Weight:
5.47 lbs (2.48 kg)
Handle:
Foldable
Latch Type:
Single-Stage
Lockable:
No
Made in the U.S.A.:
Yes
Pressure Relief Valve:
No
TSA Approved
:
TSA requires the following:
- The firearm must be in a hard-sided container.
- The container must be locked. A locked container is defined as one that completely secures the firearm from being accessed. Locked cases that can be pulled open with little effort cannot be brought aboard the aircraft.
Please refer to the TSA website for more information:
TSA Transporting Firearms and Ammunition
No
Wall Construction:
Double Wall lid - Single Wall Base
Waterproof
Waterproof: Yes - IP67 Rated 100% protected from dust and sand and can be submerged up to 3 feet of water for up to 30 minutes
Weather resistant - Can withstand spashes of water but cannot be submerged
:
Weather resistant - Can withstand spashes of water but cannot be submerged
No
Wheels:
No Wheels
Custom Foam Information
With MyCaseBuilder, you are designing full replacement foam for the base of your case.
When you receive your foam it will be the full height and slip right into the base of your case.
If you have a case already and only need replacement foam, you will have the choice to add lid foam during checkout.