Labradar Chronograph
Pelican 1550
User Designed
Description
** This design was shared by a user - please verify all shapes and dimensions **
Default is black TopGuard base and charcoal ester convoluted lid when you select buy case with foam as shown.
Holds the velocity measurement device and all accessories
- Labradar device
- Aiming red dot optic
- USB Battery
- Low profile bench top base
- Base swivel mount
- lower compartment for wires and accessories
Specifications
Inside Dimensions
Length:
18.875" (479mm)
Width:
14.5" (368mm)
Base Depth:
5.875" (149mm)
Lid Depth:
1.75" (44mm)
Total Depth:
7.625" (194mm)
Corner Radius:
.6875 (10mm)
Outside Dimensions
Length (O.D.):
20.66" (525mm)
Width (O.D.):
17.2" (437mm)
Total Depth (O.D.):
8.4" (213mm)
Case Information
Case Type:
Injection Molded
Durability:
Heavy Duty
Empty Weight:
10.58 lbs (4.8 kg)
Handle:
Foldable
Latch Type:
Two-Stage
Lockable:
Padlockable
Made in the U.S.A.:
Yes
Pressure Relief Valve:
Yes
TSA Approved
:
TSA requires the following:
- The firearm must be in a hard-sided container.
- The container must be locked. A locked container is defined as one that completely secures the firearm from being accessed. Locked cases that can be pulled open with little effort cannot be brought aboard the aircraft.
Please refer to the TSA website for more information:
TSA Transporting Firearms and Ammunition
Yes, Airline approved
Wall Construction:
Single Wall-Injection Molded
Waterproof
Waterproof: Yes - IP67 Rated 100% protected from dust and sand and can be submerged up to 3 feet of water for up to 30 minutes
Weather resistant - Can withstand spashes of water but cannot be submerged
:
Weather resistant - Can withstand spashes of water but cannot be submerged
Yes
Wheels:
No Wheels
Custom Foam Information
With MyCaseBuilder, you are designing full replacement foam for the base of your case.
When you receive your foam it will be the full height and slip right into the base of your case.
If you have a case already and only need replacement foam, you will have the choice to add lid foam during checkout.