Protective Case for DJI Phantom 3 Drone in a SKB 3I-1914-8


or Buy this Design -- With or Without a case

$402.17
Hurry up! Current stock:

Store your DJI Phantom 3 Drone properly in this precision-cut custom foam SKB case. Click the CUSTOMIZE button to add or remove spaces for other shapes or accessories!

Case with foam as shown includes black TopGuard base and charcoal ester convoluted lid.



Includes Spaces for:

A - DJI Phantom 3 Drone

B, C, D, E - Battery

F - Catchall for other accessories 

G - Charger & Cable

H - DJI Phantom 3 Controller

 

SKB 3i-1914-8
O.D. 21.26" x 16.75" x 9.83"
I.D. 18.938" x 14.375" x 8.06"

 

Features

The 3I Series Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage. Features a continuous molded-in hinge, patent pending "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810F).

  • Waterproof and Dust Tight Design (MIL-C-4150J)
  • Continuous Molded-in Hinge for Added Protection
  • Patented Trigger Release Latch System
  • Snap-Down Rubber Over-Molded Cushion Grip Handle
  • Automatic Pressure Equalization Valve (MIL-STD-648C)
  • Resistant to UV, Solvents, Corrosion, and Fungus (MIL-STD-810F)
  • Resistant to Impact Damage (MIL-STD-810F)
  • Lockable with a padlock
  • Retractable Handle and Edge Casters Standard

Description

Store your DJI Phantom 3 Drone properly in this precision-cut custom foam SKB case. Click the CUSTOMIZE button to add or remove spaces for other shapes or accessories!

Case with foam as shown includes black TopGuard base and charcoal ester convoluted lid.



Includes Spaces for:

A - DJI Phantom 3 Drone

B, C, D, E - Battery

F - Catchall for other accessories 

G - Charger & Cable

H - DJI Phantom 3 Controller

 

SKB 3i-1914-8
O.D. 21.26" x 16.75" x 9.83"
I.D. 18.938" x 14.375" x 8.06"

 

Features

The 3I Series Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage. Features a continuous molded-in hinge, patent pending "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810F).

  • Waterproof and Dust Tight Design (MIL-C-4150J)
  • Continuous Molded-in Hinge for Added Protection
  • Patented Trigger Release Latch System
  • Snap-Down Rubber Over-Molded Cushion Grip Handle
  • Automatic Pressure Equalization Valve (MIL-STD-648C)
  • Resistant to UV, Solvents, Corrosion, and Fungus (MIL-STD-810F)
  • Resistant to Impact Damage (MIL-STD-810F)
  • Lockable with a padlock
  • Retractable Handle and Edge Casters Standard

Inside Dimensions

Inside Length:
18.9375" | 481mm
Inside Width:
14.4375" | 367mm
Inside Base Depth:
5.9375" | 151mm
Inside Lid Depth:
2.125" | 54mm
Inside Total Depth:
8.0625" | 205mm
Corner Radius:
0.875" | 22mm


Outside Dimensions

Length (OD):
21.24" | 539mm
Width (OD):
16.77" | 426mm
Total Depth (OD):
9.83" | 250mm

Specifications

Carry On:
Yes
Durability:
Heavy Duty
Case Type:
Injection Molded
Empty Weight:
13.19 lbs (5.98 kg)
Handle:
Three Foldable & One Retractable
Number of Handles:
4
Latch Type:
Push Button
Number of Latches:
2
Label Recess Area:
3.235" x 1.87" | Radius .187
Warranty:
Lifetime
Stackable:
Yes

 

Made in:
USA
Lockable:
Double Padlockable
Pressure Relief Valve:
Yes, Automatic
TSA approved:
Yes
Wall Construction:
Single Wall-Injection Molded
Waterproof:
Yes, IP67 Rated
Dustproof:
Yes, IP67 Rated
Wheels:
Wheeled
Lid Organizer Available:
N/A
Certifications:
Mil-Spec
Shoulder Strap Compatible:
N/A